HomeGuidesService contracts for windows, doors and garage doors: how to keep them separate from the warranty
Law and contracts

Service contracts for windows, doors and garage doors: how to keep them separate from the warranty

A customer calls three years after installation and wants a free adjustment “under warranty”. A service contract separates paid maintenance from free defect repair. What it should cover for windows, doors and garage doors, how to price it, what not to put in it when the customer is a consumer and how to sell it.

Alstre Team18 min read
What a service contract is — and what it is not

The problem here is not a difficult customer but a gap in the paperwork. The showroom sold windows with installation and issued a warranty card, but never described what happens after installation beyond defects: who adjusts the hardware and for how much, when an inspection is needed, what is included and what is not. A service contract fills that gap. A well-written one does three things at once — it separates paid maintenance from free defect repair, turns random phone calls into planned visits and gives the showroom revenue that does not depend on the sales season.

Below we explain how a service contract differs from a warranty and from statutory liability, what it should cover for windows, doors and garage doors, how to price it, what not to put in it when the customer is a consumer, and how to sell it so the customer sees a benefit rather than another cost.

What a service contract is — and what it is not

A service contract is an agreement in which the showroom (or installation company) undertakes to carry out periodic inspections, adjustments and maintenance of the installed products, and the customer undertakes to pay for that work. In most countries it is not a contract type with its own statutory rules, so its content depends on what the parties write. Inspection and adjustment are usually a service where what counts is diligent work rather than a specific result; a repair with a defined outcome is closer to a contract for work.

What matters most, though, is what a service contract is not. It does not replace liability for defects or a warranty. These are three different sources of obligations that, in a conversation with a customer, all merge into one word — "warranty" — and that is exactly why they need to be separated on paper.

Statutory liability

Warranty

Service contract

Where it comes from

From the law — towards consumers from local consumer protection rules (in the EU, the legal guarantee of conformity), towards businesses from general sales law

From a voluntary statement by the warrantor — the manufacturer or the showroom

From a contract signed by both parties

What it covers

Defects existing at delivery, usually including those caused by incorrect installation carried out by the seller

Whatever the warrantor described in the warranty card

Whatever the parties agreed: inspections, adjustments, maintenance, response time

Who pays

The seller — the customer does not pay for remedying a defect

The warrantor, within the limits of the card

The customer — under a price list or a subscription

Can it be excluded

Towards consumers — as a rule, no. Towards businesses — often it can be limited or excluded by contract, depending on the country

The warrantor decides the scope, but cannot use it to limit statutory rights

The parties agree the scope, but it cannot take away the rights in the two previous columns

Duration

Set by local law — in the EU at least two years from delivery for consumers

Whatever the warrantor states

Whatever the parties agree — one year, several years or open-ended

In practice, the line runs like this: a defect is something that was wrong from the start or results from the installation; maintenance is the work a product needs over time and with use — adjusting hardware after the building settles, lubrication, clearing drainage slots, replacing worn seals, setting the limit switches of an operator. A service contract covers the second group. On every visit the technician must be able to say which group a fault belongs to — and record it in the report.

Why a showroom needs a service contract

Many showroom owners see service as a necessary evil: a cost that eats into the sales margin. A service contract turns that calculation around.

  • Recurring revenue. Window sales are seasonal; inspections can be spread over the months when installation crews have gaps in their schedule — late autumn and winter.

  • An end to "warranty" disputes. The customer knows in advance what is free and what is paid, because they signed it in a separate document.

  • Contact with the customer years later. A technician who is in the customer's home once a year hears about the planned front door replacement, the neighbour's garage door and the loft conversion. It is the cheapest source of new jobs and referrals.

  • Fewer complaints. Adjusted hardware and clear drainage mean fewer "the window leaks" calls after the first heavy rain — and every complaint costs more than an inspection.

  • Proof of proper use. In a dispute with the manufacturer, inspection reports show the product was maintained according to the instructions.

What servicing windows, doors and garage doors involves

The scope of an inspection depends on the product. The table below shows typical tasks and an indicative frequency — the manufacturer's use and maintenance instructions always take precedence, so it is worth referring to them in the contract.

Product

Typical inspection tasks

Indicatively

PVC and aluminium windows

Adjusting sash pressure and position, lubricating hardware, checking and cleaning seals, clearing drainage slots, checking handles and locks, checking the inside seal at the wall

Once a year

Timber windows

As above, plus assessing the coating, spot repairs, recommending refinishing

Once a year, coating as per manufacturer

External doors

Adjusting hinges and pressure, checking the lock and cylinders, lubrication, checking the threshold and seals, checking the door closer

Once a year

Internal doors

Adjusting hinges, checking the lock and handle, aligning the leaf in the frame

On request

Garage doors with an operator

Checking springs and cables, tracks and rollers, lubrication, testing safety devices (photocells, limit switch, reversal on obstruction), setting the operator force, testing remotes

Once a year, more often with heavy use

External roller shutters and insect screens

Checking the curtain and guides, setting motor limits, checking the mesh and fixings

Once a year or on request

Three models of service contract

There is no single right model — the choice depends on who you sell to and how many service crews you have. Most showrooms start with one and add another once they see which one customers choose.

Inspection package (subscription)

Inspection on demand with a price list

Service with guaranteed response time

How it works

Fixed annual fee covering a set number of inspections and adjustments

Framework agreement with a price list, payment per visit

Standby fee, call-out within a set time, work under a price list or flat rate

For whom

Houses with many windows, a garage door and shutters

Customers who do not want a fixed fee

Businesses, housing associations, property managers, shops, offices

For the showroom

Predictable revenue, visits planned in the quiet season

Easy to start, no risk of "too much work in the subscription"

Highest margin, but needs an available crew

Watch out for

A clear list of what is in the fee and what is not — otherwise the subscription becomes "everything included"

The customer postpones the inspection until something breaks — and the conversation goes back to the warranty

A response time your crew can actually meet, even at the height of the season

What a service contract must contain

The list below is a framework that works for windows, doors and garage doors. Each point answers a question someone will certainly ask if there is a dispute.

  1. Parties. Details of the showroom and the customer, and in multi-unit buildings — who orders (owner, housing association, property manager) and who provides access.

  2. Subject of the contract. A list of the products covered: how many windows, which doors, which garage door and operator, where installed. The simplest way is to refer to the sales contract and attach its specification.

  3. Scope of work. What an inspection covers — ideally in a table like the one above. Separately: what is not included (spare parts, glass replacement, repairing mechanical damage, work on the masonry).

  4. Timing. How many inspections a year, in which months, how visits are booked, how far ahead the showroom proposes a date and what happens if the customer does not accept it.

  5. Response time to a call-out. If you promise one — in working days, with urgent cases defined separately (e.g. the garage door won't close, the front door can't be locked).

  6. Price. Annual fee or price list, travel, payment method and deadline, rules for changing prices in a multi-year contract.

  7. Parts and materials. Whether they are included or charged separately; which ones (manufacturer's original or equivalents); who decides on replacement.

  8. Defects versus maintenance. State it plainly: remedying defects covered by statutory liability and the warranty is free and is not the subject of this contract. That one sentence closes most disputes.

  9. Inspection report. That every visit ends with a report, what it contains and that the customer receives a copy.

  10. Customer's obligations. Access to the products, reporting faults, using them according to the instructions, no interference by third parties.

  11. Liability. You are liable for damage caused during an inspection under general rules; towards a business you can reasonably limit it, towards a consumer — not in a way that removes their protection.

  12. Duration and termination. Fixed or open-ended term, notice period, whether the contract renews automatically and how the customer can prevent it.

  13. Complaints about the service. How to raise concerns about the inspection itself and how quickly the showroom responds.

  14. Personal data. Information on data processing — a service contract is another purpose for processing the customer's data.

How to price service work

The price of an inspection depends on the region, the number of products and the travel involved, so we do not give amounts — we give the components it should include. The most common mistake is a price that covers labour but leaves out travel and the time needed for the report.

Price component

How to calculate

Watch out for

Travel

Flat rate within a zone, per kilometre/mile beyond it

Driving out to one window costs the same as driving out to twenty

Inspection

Per sash, per door, per garage door — or a flat rate per house

Roof windows, windows at height and garage doors take more time

Work beyond the inspection

Hourly rate or a price list of tasks

Tell the customer before starting that the work is extra

Parts and materials

Parts price list with a margin

Small seals and lubricants — decide whether they are in the flat rate

Wasted visit

Call-out fee when nobody provided access

Only if it is in the contract and the customer confirmed the appointment

Annual package

Sum of inspections minus a commitment discount

The discount must not fall below the cost of travel and crew time

Inspections and the manufacturer's warranty terms

Many manufacturers state in the warranty card that the warranty applies on condition of regular maintenance — especially for motorised garage doors and timber windows. For the showroom this is a sales argument, but also a duty to inform.

  • Show the customer the condition in writing. If the manufacturer requires an inspection once a year, the customer should know at handover, not at the first refusal.

  • Do not mix the warranty with statutory rights. A missed inspection may matter for the manufacturer's warranty, but it does not release the seller from statutory liability towards a consumer.

  • Think twice before making the showroom's own warranty conditional on paid inspections carried out only by you. A condition that forces the customer to buy services only from the warrantor may be seen as unfair towards a consumer. Safer: an inspection by any qualified company, confirmed by a report.

Contracts with consumers: what to watch

When the customer is a private individual, a service contract is subject to consumer protection. Clauses that would be fine in a contract with a business may turn out not to be binding on a consumer.

Risky clause

Why

Safer version

"All repairs during the contract are charged according to the price list"

It also covers remedying defects, which is free

"Maintenance work and repairs of faults that are not defects are charged"

"The contract renews automatically for further years"

Without a simple way to cancel, the customer is bound against their will

Renewal with a reminder before the end of the term and the right to cancel at any time with short notice

"The showroom may change the price list at any time"

A unilateral price change without grounds is a typical unfair term

A change once a year, announced in advance, with the right to terminate

"The showroom is not liable for damage caused during an inspection"

Excluding liability towards a consumer is largely ineffective

Liability under general rules, crew covered by liability insurance

"No inspection by the showroom means loss of the warranty and statutory rights"

Statutory liability cannot be excluded this way

Information about the manufacturer's warranty terms, without affecting statutory rights

Contracts with businesses, housing associations and property managers

With a business customer you have more freedom: you can limit liability, agree penalties for missed response times in both directions and accept longer payment terms in exchange for a fixed fee. This is where the guaranteed response time model works best.

  • Housing associations and property managers need reports for the building's records — servicing the windows in stairwells and the entrance doors is their obligation towards residents.

  • Shops and offices pay for time: automatic doors that won't close for the night are a same-day problem.

  • Developers need service during the period in which they are liable towards apartment buyers — a chance for a contract covering a whole development.

The inspection report: what to record

The report is proof that the inspection took place and the basis for deciding whether the next fault is a defect or the result of use. It should be filled in on site and signed by the customer.

Field

Why

Date, time, technician

Who and when — in a dispute about timing or quality of work

List of products with item numbers

What the inspection covered, without guessing "which window"

Condition on arrival

What was found — with a note of what the customer reported

Work carried out

What was done on each item

Fault classification

Defect or maintenance — with a short justification

Recommendations

What the customer should do or avoid, what needs replacing at the next visit

Photos

Condition before and after, especially with mechanical damage

Signatures

Confirmation by the customer, with space for their comments

Tax on service work

Inspecting and adjusting windows and doors is a service, and the sales tax or VAT rate that applies depends on the country — and in some countries on the type of building and whether the work counts as maintenance of a home. Some tax systems treat service work in residential buildings differently from work in commercial premises.

How to sell a service contract

A service contract is not sold in the showroom while the customer is choosing a profile — at that point they are thinking about the price of the windows, not about what happens in three years. There are better moments.

  1. At handover after installation. The installer shows how to adjust the sash pressure for summer and winter and hands over a leaflet describing the package. The customer has just seen that the products need looking after.

  2. At the first fault after the showroom's warranty period. A paid call-out is a good moment to offer the package with that visit deducted.

  3. In autumn. Before the heating season customers notice draughts and ask about adjustment — the best month for a campaign to existing customers who have agreed to be contacted.

  4. With motorised garage doors — straight away. Here the safety argument and the manufacturer's requirement are strongest.

The most common mistakes

  • A contract without a list of products. Three years later nobody remembers whether the garage window was covered.

  • "Everything included". A subscription without exclusions turns into free handling of every fault, including mechanical damage.

  • Charging for a defect repair. Taking money for something that is a defect ends in a refund and a bad review — and, after a few such cases, the attention of consumer protection authorities.

  • No reports. Without them there is no proof of maintenance for the manufacturer and no fault classification for the customer.

  • A response time the crew cannot meet. "Call-out within 24 hours" in May, when every crew is on installations, is an empty promise.

  • Automatic renewal without a reminder. A customer who learns about another year from an invoice rarely stays for the next one.

Disclaimer

This text describes common practice and general principles on the date of publication. Consumer protection, contract and tax rules differ from country to country. It is not legal or tax advice. Before introducing your own service contract template — especially the clauses on liability, renewal and price changes towards consumers — it is worth having it reviewed by a lawyer in your country, and the price list and tax rates by an accountant.

Service in the same place as sales

A service contract only works if the technician knows what is installed at the customer's home and what happened before. In Alstre, service requests go into the same register as complaints, linked to the sales contract, the site measurement and the installation photos. You schedule a site visit with a date and a technician, the report is stored with the case, and after a year you can see which products and which manufacturers come back most often.

Alstre

All of this happens on its own when documents come out of the system.

The contract template brings in your terms for a private customer or a business, the measurement turns into a quote and the complaint keeps track of the reply deadline.