Home/Who it's for/Window sills and finishes

Software for window sill and finishing companies

Lots of small jobs — and in each one the nose, thickness and bend angle recorded at the customer's.

Alstre is a CRM for companies that sell and install interior and exterior window sills, floor and wall panels, and skirting. The surveyor records material, length, depth, thickness, nose overhang, edge finish, bend angle and fixing, and the wizard warns about mistakes before the order reaches the workshop.

It fits you if:

  • You handle lots of small jobs: sills, panels, skirting
  • You order cut-to-size elements
  • You install after window replacement or during interior finishing
Section under the window · interior and exterior sill
Fields from the Alstre measurement form · dimensions in mm
The wizard warns on site: Bend angle < 5° — water may not run off
  • Nose overhangmm
  • Thicknessmm · quartz, granite, PVC…
  • Edge finishe.g. bevelled, rounded
  • Bend angle° · exterior sill
  • Fixingadhesive · screws · both

What you can record in a survey

Categories from the system database with the full set of finishing-trade fields — from window sills to skirting boards.

Interior window sill
Exterior window sill
PVC window sill
Wall panels
Floor panels
Vinyl panels (LVT)
Engineered wood
Skirting boards
Finishing trims
Plinths
Adhesive / silicone
Installation accessories

A day in your showroom — with the CRM in the background.

A real flow from the morning phone call to closing the job in the evening. Every step leaves a trace in the system.

  1. 3 calls in the morning

    Three jobs from three window crews: A) 4 interior sills in agglomerate, B) 2 exterior sills in aluminium, C) a granite kitchen worktop. The adviser registers all of them in 6 minutes.

  2. Surveyor — 5 addresses today

    The day's plan in the app: 5 jobs, a map, times. On average 45 minutes per address plus travel. Nothing gets forgotten, because the system asks for every field.

  3. Lightning-fast measuring

    The sill wizard asks only for its own fields: length, depth, material, thickness, nose, end caps. 4 sills in a few minutes. One photo per item. The customer signs with a finger.

  4. Special case: an exterior sill

    With a bend angle below 5° the system warns about the risk of water stains, and for a sill longer than 2 m on adhesive alone it suggests screws. The mistake shows up at the customer's, not during installation.

  5. The adviser prepares 3 quotes

    A quote from each measurement in 30 seconds. Items and dimensions carry over from the measurement, the adviser adds prices, VAT comes from your company's default rate. 3 PDFs, 3 emails.

  6. Customer B decides

    The exterior sill customer calls back after the emailed quote. A contract for a private customer is created from their quote, with your terms for made-to-measure goods and a 30% deposit.

  7. Installation

    The crew drives out with 4 agglomerate sills. The phone shows the address with navigation, dimensions accurate to ±1 mm, the overhang direction. After installation — the customer signs the acceptance protocol, with a PDF.

Quotes without retyping

Showrooms lose most time on quotes: retyping the manufacturer's pricing by hand. Here the software does it.

Read by AI

Your quote from the manufacturer's pricing

You load the pricing from the manufacturer's software with the “Import from PDF” button, and your customer gets a quote with your showroom's logo and details — even when the items come from several manufacturers. The software reads the items, dimensions and prices, adds your markup or takes a discount off the list price, and checks the total against the document.

How a quote is made

The crew gets a link, not an account

A subcontractor sees their installations on the phone: address, date, items and protocol. The office sees ticked-off stages at once, and after the last one the contract moves to “Completed” by itself.

Installation calendar

Without a CRM vs with ours — real situations from your trade.

Without a CRM

How it works today

  • Measuring 4 sills on a paper sheet — 20 minutes, mistakes in the overhangs
  • Pricing by hand in Excel — a mix-up in m² / running metres on the 15th job of the week
  • No material allowance in the price → the job breaks even at best because the material was cut wrong
  • Granite worktop without a cut-out sketch → cut without a hole for the tap, the sink doesn't fit
  • VAT rate typed by hand on every item — and sometimes wrong on the document the customer checks
  • Jobs got lost between 3 crews — the customer calls: “so who did the work for you?”
With our CRM

How it works with us

  • A wizard with sill fields — 4 sills in a few minutes
  • Dimensions carry over from the measurement to the quote — no retyping
  • Material and thickness on every item — pricing without guesswork
  • On-site warnings: thin agglomerate, a flat bend angle, a long sill on adhesive
  • Your default VAT rate on every item — you can change the rate of any item
  • Jobs in the crew calendar — every address shows the surveyor, the installation crew and the date

Questions about software for window sill companies

What window sill details does the surveyor record?

For an interior sill: material (PVC, granite, marble, quartz agglomerate, aluminium, wood, postforming), length, depth, thickness, nose overhang and edge finish. For an exterior sill: material (aluminium, stainless steel, coated steel, clinker), thickness, bend angle and fixing method.

What does the wizard warn about for window sills?

About agglomerate thinner than 20 mm, a nose overhang of more than 50 mm, an exterior sill bend angle below 5° and a sill longer than 2 m fixed with adhesive only.

Does the software handle panels and skirting?

Yes. Floor panels have an AC abrasion class, laying pattern and expansion gap; wall panels have height and number of walls; skirting boards have height, fixing and the number of corners and end caps.

How much does software for a window sill company cost?

The Start plan for one person costs $49 net per month, Pro for a team of up to 10 people $99, and Business for a network of up to 10 branches $229. Plans differ in their limits, and Business also lets you run several companies from one account. You can try any of them free for 14 days, without entering a card.

It isn't the big job that wins here. It's the time it takes to handle one small one.

Finishing work follows different arithmetic from windows: the amounts are low and the jobs are many, so every minute spent on a single order multiplies across the whole week. The wizard asks only for the fields that really matter for a sill, and the quote is built from ready measurement items. It's not about a flashy feature — it's about handling four window sills without it costing as much as the windows for a whole house.

14 days free, no card. We import customers and job history from Excel.