Home/Features/Window designer
Feature · Window designer

A window designer in your quotes. You draw the window, your price list prices it.

The Window designer builds a window from sections: you split them with mullions and transoms, then set the opening type, hinge side, glazing bars and trickle vent for each one. Sashes, mullions and metres of transom are counted from the drawing, and your price list turns them into the item price. The customer gets a drawing with opening codes and dimensions in the quote PDF.

14 days freeno card neededwindows and balcony doors
The Window designer in a quote: a triple-sash window drawing, the section panel and pricing from the price list
Drawing

Window drawing with sashes, mullions and transoms

Start from a template or from a single section. Every split has a size in millimetres or takes “the rest”, so the parts always add up to the window size. The drawing is viewed from inside, as manufacturers draw it, and the outside view shows the mirror image with dashed opening lines.

Section panel in the designer: opening type, hinges, section width and mullion type

Templates with typical sizes

Eleven templates, from a single sash window to an HS door. An item without a size gets the template’s typical size, e.g. 1465 × 1435 mm.

Mullions, transoms and sizes on the drawing

Any section from 400 mm can be split with a mullion or a transom. Clicking a number on the dimension line changes that part’s width, and the next part takes the rest.

Opening type for every section

Fixed, side-hung, tilt and turn, bottom-hung, HS lift-and-slide and PSK tilt-and-slide, with the hinge side of your choice.

Floating mullion and passive sash

Between two side-hung sashes the mullion can be floating. The hinges set themselves, and a handle on the passive sash is a separate option.

Glazing bars, trickle vent and low threshold

Up to six glazing bars each way, a trickle vent in the section (including a specific model from your price list) and a low threshold on balcony doors.

Glass size in every section

Each section shows its glass size, worked out from the actual widths of the frame, mullions and sashes rather than the opening size.

Outside view in the façade colour

The “Outside view” switch shows the window from the street: a mirror image with dashed opening lines and the profile in the exterior colour.

Layout summary under the drawing

Under the drawing you see the number of sections, opening sashes and the opening direction, e.g. L+F+R. They are saved to the item together with the drawing.

In the quote

The drawing is saved to the item, the price goes into the quote

“Save to item” stores the size, colour, model and drawing and, if the option is ticked, the price from your price list. The item gets a thumbnail with opening codes, and its details describe the layout: the number of sections, opening sashes and the direction.

Quote item with a thumbnail of the designer drawing and the price from the price list
  • The thumbnail opens the designer

    Clicking the drawing on an item opens the designer with the saved layout. A correction takes a few clicks, not a new item.

  • Drawing in the customer’s PDF

    In item layouts with images, the quote PDF shows the drawing with opening codes and dimensions.

  • Unpriced items stand out

    An item without a price is highlighted in the list, and the quote totals warn that they are incomplete.

In the price list

Element prices next to model prices

The “Elements” tab sits under windows and balcony doors in Settings → Price list. Each element is priced per piece, per metre or as a % of the window price, for all models or only selected ones. A blank field means no price; 0 means the element is included in the window price.

The “Elements” tab in the window price list: prices for sashes, mullions, transoms and extras
Pricing from the drawing

The price comes from what’s drawn, not from what someone remembers.

Price list quote in the designer: model, sashes, fixed pane, mullion and colour

Elements in the price list

R, RU, U, HS and PSK sashes, fixed pane, mullions, transom, glazing bars, trickle vent, low threshold and a handle on the passive sash. Priced per piece, per metre or as a % of the window price.

Blank means no price

An element with no price in the price list shows a warning in the quote, not a silent zero. Entering 0 means the element is included in the window price.

Colour on both sides

Inside and outside colours from your price list’s colour groups, with colour and bicolour surcharges. On the drawing the profile takes the shade your company set in the price list.

Sash limits

Sash width, height, area and weight from the model’s technical sheet. A sash outside the limits gets a red outline. It’s a warning, not a block.

Drawing in the quote PDF

The item gets a drawing with opening codes and dimension lines: as a thumbnail in the quote and in the PDF for the customer. Clicking the thumbnail opens the designer.

Elements from Excel

The “Elements” tab is part of the price list export and import, with a preview of changes and undo for 30 days.

How it works

From price list to drawing in the PDF without a sketch on paper.

  1. Price list
  2. Quote
  3. PDF

Enter element prices once

In Settings → Price list, on the “Elements” tab, set prices for sashes, mullions, transoms and extras, for all models or only selected ones.

  1. Price list
  2. Quote
  3. PDF

The adviser draws the window

On a window or balcony door item they open the designer, pick the model, colour and layout, and the price updates as they go.

  1. Price list
  2. Quote
  3. PDF

The customer sees the drawing

“Save to item” stores the size, colour, drawing and price. In the quote PDF the item has a drawing with opening codes and dimensions.

Why it matters

The customer sees what they’re buying.
And the price follows the drawing.

Everyone reads “double sash window, left tilt and turn” a little differently. A drawing with dimensions and opening codes is one and the same for the adviser, the customer and whoever places the order with the manufacturer. And because the price is worked out from the elements of the drawing, an extra mullion or a third sash can’t slip through the quote.

Rules

What the designer saves and when it changes the price

The designer works in quotes, on window and balcony door items. It saves the drawing, size and colour to the item, and the price only when you allow it.

  • Price only with your consent

    On saving, the “Set item price from price list” option decides. By default it’s ticked only when the item has no price yet, so a negotiated amount never changes by itself.

  • No price list? You can still draw

    A company without a price list can use the designer for drawing. The drawing goes into the item and the PDF, and you type the price in yourself. Prices from the drawing come with a price list of models and elements.

  • Limits are warnings

    A window or sash outside the model’s limits is flagged on the drawing and in the quote, but it can still be saved. You decide on a split or another model together with the customer.

  • Always drawn from inside

    The drawing is stored as viewed from inside, like manufacturers’ drawings. The outside view is a mirror image with dashed opening lines, for showing the customer.

FAQ

Questions about the window designer.

Can customers configure a window on my website themselves?

No. The Window designer is a tool in the app for your team: the adviser draws the window in the quote, and the customer gets the finished drawing in the PDF. Alstre doesn’t offer a configurator to embed on your shop’s website.

What products can I draw?

Windows and balcony doors: from a single sash window, through windows with a top light or a floating mullion, to an HS lift-and-slide door. Front doors, internal doors, garage doors and blinds get a drawing from their dimensions in the quote, without the designer.

Where does the designer get its prices?

From your price list: the model price per m², per metre of perimeter or per piece, element prices from the “Elements” tab, colour and bicolour surcharges, and the model’s accessories. The table under the drawing shows every line and the total.

What if an element has no price in the price list?

The element stays on the drawing and the quote shows a “no price” warning. The amount is never silently zero. If the element is included in the window price, enter 0 in the price list.

Does the drawing appear in the quote PDF?

Yes, in item layouts with images: a drawing with opening codes (e.g. RU), handles and dimensions. If the item has a photo from the survey or a manufacturer’s drawing from a PDF import, that is shown first.

Can I change a saved drawing?

Yes. Clicking the item thumbnail in the quote opens the designer with the saved drawing. Save it again after your changes, and either apply the price list price or keep the current one.

Can one model have different surcharges from the rest?

Yes. Each element on the “Elements” tab can have a price for all models and a separate one for selected models. The model-specific price takes priority, so a tilt-and-turn sash in a premium system is priced at its own rate.

Will the designer check that a sash isn’t too big?

Yes, if you enter sash limits for the model: width, height, area and weight from the technical sheet. A sash outside the limits gets a red outline, and a list of the exceeded limits appears under the drawing. It’s a warning, not a block.

Get started

Create an account and draw your first window.

14 days free, no card. The designer works straight away, even without a price list.

Create an account
Price list from Excel

Got your manufacturer’s price list in Excel?

Load models and element prices from the file, with a preview of changes. If your spreadsheet has an unusual layout, get in touch and we’ll help you map it.

Contact us