HomeGuidesDoor colour doesn't match the sample: who is right?
Sales and quotes

Door colour doesn't match the sample: who is right?

The sample shown at the point of sale is a promise about the goods, not showroom decoration. When a difference in shade means the product does not match what was agreed, and when it is simply the nature of the material.

Alstre Team7 min read

This conversation ends in one of three ways: a replacement at your own cost, a dispute that drags on for months, or — most often — a discount squeezed out just to make the matter go away. All three are losses, and the cause lies weeks earlier, in the showroom, at the swatch board. Below: when a colour difference means the product does not match what was agreed and when it does not, what weight the sample shown at the point of sale actually carries, why showroom lighting is a real sales problem, how to word a tolerance clause so it holds up, and how to handle the conversation once it has started.

The sample is part of what you agreed

The starting point runs against a salesperson's instinct. A swatch board is not showroom decoration or illustrative material — it is a statement about the properties of the goods, made at the moment the deal is struck.

If you show a customer a sample and they order on that basis, the sample becomes part of the description of what they bought. In most countries consumers also have statutory rights when goods do not match what was agreed, and a sample shown before signing is exactly that kind of agreement. In practice, assume that whatever the customer saw on the swatch board is what you promised to deliver, unless you clearly said otherwise before the order.

The phrase "the swatch board is for illustration only", produced for the first time when the complaint arrives, changes nothing. It only counts if it was said before signing and there is a record of it.

Three different things a customer calls the wrong colour

Natural variation in the material

Veneer, solid wood, stone. Every piece is different, and that is a characteristic, not a defect — provided the customer was warned and the spread stays within what is normal for that material. The problem is not the variation itself but its extent, and the fact that nobody mentioned it.

A variant of this happens with orders delivered from several batches: a single leaf matches, but six side by side do not, because two came from a different delivery. This is a real problem, and it is worth thinking about when you place the order, not after delivery.

Variation within the product's repeatability

Lacquers, printed foils, powder coatings. Here the relevant figure is the colour repeatability between batches declared by the manufacturer, usually expressed as a permissible difference measured with an instrument. The customer does not know it, but the manufacturer does — and it is a value worth having copied from their documentation before you need it.

A difference within the manufacturer's tolerance is not a defect. A difference outside it is — and not only towards the customer, but also between you and the manufacturer.

Simply a different colour from the one ordered

A wrong line on the order, a different shade from the range, frames in a different finish from the leaves. This is not a dispute about tolerance, just an ordinary mismatch with the order, and the only one of the three situations where the answer is "we apologise, we will replace it".

Separate these before the discussion starts, because a showroom that hides behind tolerance in the third situation loses the customer and its credibility for every conversation that follows.

Showroom lighting is a sales problem

This part has nothing to do with the law, yet it accounts for most complaints. The same product shows one shade under a warm display tube, another in north-facing daylight, and yet another in a living room with a south-facing window and a wooden floor that throws back a warm reflection.

You cannot eliminate this, but you can manage it:

  • Display lighting with high colour rendering, at a neutral colour temperature. The fittings cost less than replacing one set of doors.

  • A spot by the window where you take the sample. One sentence — "let's see how it looks in daylight" — does the job of a whole procedure.

  • A sample to take home. The most effective tool in this category and the least used. The customer holds it where the doors will stand and decides in the real conditions. A deposit, or a refund against the order, deals with the cost.

  • A photo of the sample by the customer's window, if you are going out for a measurement anyway. It takes thirty seconds and it is a record.

Illustration: a salesperson with a pen next to a long document — the colour tolerance clause in the contract

A clause that holds up — and one that does not

A tolerance clause only makes sense if it is specific, justified by the properties of the material and shared before the contract is signed. With consumers, a clause drawn too widely will not just fail to help — it can easily be challenged as unfair and set aside.

Will not hold up: "The seller accepts no responsibility for colour differences." That is an exclusion of liability with no limits and no reason.

Will hold up: naming the material, naming the source of the tolerance and naming the reference — for example, that with natural veneers the grain and shade vary by the nature of the raw material, that the permissible difference between batches follows the manufacturer's documentation, and that the reference is the sample with a given number, handed to the customer when ordering.

The last element is the most important and the cheapest: the sample number written on the order. Without it, three months later the dispute is about which sample the customer actually saw — and that argument cannot be settled.

How to handle the conversation

Once the call has come in, the order of steps decides the outcome.

Look first, answer second. Judging colour over the phone is impossible, and saying "that's definitely within tolerance" without having seen it is a commitment that is hard to walk back.

Inspect in the actual location and in daylight, sample in hand, ideally with a photo. Not in the showroom and not in the evening.

Decide which of the three situations you are dealing with — and say so plainly, including when the answer is "this is our mistake".

With natural variation, show what it consists of. A customer who has it explained that every piece of this material is different, and is shown three other leaves from the same batch, usually stops seeing a defect. A customer brushed off with the word "tolerance" does not.

Do not buy peace with a discount without a decision. A discount given while your position is unclear is read as an admission of a defect, and on the next order it comes back as an expectation.

What to record

At the order: the sample or swatch board number, the version of the manufacturer's colour range, the date. At delivery: the batch number and, for orders delivered from several batches, which items came from which. At a complaint: daylight photos, the result of the inspection and the basis for the decision.

This record has one more use people rarely think about. After a year it shows which finishes keep generating complaints — and if one particular finish from one manufacturer accounts for half the cases, that is a conversation to have with the manufacturer or a finish to take off display. Quote and order history keeps the chosen variant with the job, so months later you can reconstruct exactly what the customer chose and when.

Disclaimer

This article describes general principles and industry practice. It is not legal advice and does not replace an assessment of a specific case — whether a colour difference means the product does not match the agreement depends on the contract, the assurances given, the type of buyer, the properties of the material and the tolerances declared by the manufacturer. Clauses on permissible differences used with consumers may be assessed separately for fairness, so check them with a lawyer in your country before adding them to your contract template.

Alstre

All of this happens on its own when documents come out of the system.

The contract template brings in your terms for a private customer or a business, the measurement turns into a quote and the complaint keeps track of the reply deadline.