Home/Who it's for/Door showrooms

Software for door showrooms

Opening, wall, RC class and lock measured at the customer's — before the order goes to the manufacturer.

Alstre is a CRM for showrooms that sell and install interior and entrance doors. The wizard takes the surveyor through the wall opening, wall thickness, frame type, hinge side, threshold, burglar resistance class and lock class. When something doesn't add up, it warns while the surveyor is still at the customer's.

It fits you if:

  • You sell interior and entrance doors with installation
  • You order from the manufacturer based on measured dimensions
  • Years later, you want to know what was installed at a customer's and by whom
Entrance door · left-hand, opening outwards
Fields from the Alstre measurement form · dimensions in mm
The wizard warns on site: RC3+ doors need a class C lock
  • Hinge sideleft · right
  • Burglar resistanceRC1 · RC2 · RC3 · RC4
  • Lock classA · B · C · certificate
  • Wall depthmm
  • Thresholdstandard · low · none

What you can record in a survey

Door categories from the system database, each with its own set of type-specific fields.

Interior door
Entrance door
Balcony door
Technical door (EI 30/60)
Security door (RC2-RC4)
Sliding door
HST lift & slide door
Adjustable frame
Fixed frame
Handle / pull bar
Threshold
Accessories

A day in your showroom — with the CRM in the background.

A real flow from the morning phone call to closing the job in the evening. Every step leaves a trace in the system.

  1. Customer in the showroom

    A couple with a new-build flat — asking about interior doors for 4 rooms + a burglar-resistant entrance door. The adviser creates the customer in the CRM, sets the B2C type and the installation address.

  2. Measuring in the flat

    The surveyor opens field mode in a block with no signal (offline OK). For each door: opening width, opening height, wall thickness, frame type, hinge side L/R.

  3. Entrance door — special attributes

    Entrance doors add: burglar resistance class (RC3), lock class (class C), extra locks, threshold, Ud value. The system asks for each of these fields in turn, and flags the mismatch at once for RC3 with a lock weaker than C.

  4. Signal, photos, signature

    On the staircase the phone picks up a signal: the queued dimensions send themselves, the surveyor adds photos, and the customer signs the measurement with a finger on the screen.

  5. Quote from the measurement

    The adviser generates a PDF — 4 interior doors + 1 entrance door, items and dimensions straight from the measurement. Total $3,550 gross, VAT at your default rate. Sent by email with the PDF.

  6. Decision + contract

    The customer calls back in the morning and takes the quote. A contract for a private customer is created from it, with product and installation warranty periods from the company settings. The measurement protocol and the quote are already ticked on the attachment list.

  7. Installation + protocol

    Crew A drives out with the doors. The installer's phone shows the address with navigation, dimensions, classes, accessories and photos from the measurement. After installation: the customer signs the acceptance protocol, with a PDF.

Quotes without retyping

Showrooms lose most time on quotes: retyping the manufacturer's pricing by hand. Here the software does it.

Read by AI

Your quote from the manufacturer's pricing

You load the pricing from the manufacturer's software with the “Import from PDF” button, and your customer gets a quote with your showroom's logo and details — even when the items come from several manufacturers. The software reads the items, dimensions and prices, adds your markup or takes a discount off the list price, and checks the total against the document.

How a quote is made

The crew gets a link, not an account

A subcontractor sees their installations on the phone: address, date, items and protocol. The office sees ticked-off stages at once, and after the last one the contract moves to “Completed” by itself.

Installation calendar

Without a CRM vs with ours — real situations from your trade.

Without a CRM

How it works today

  • The customer gets a PDF from the manufacturer's software — with someone else's logo and a separate one for every brand
  • The surveyor writes only the leaf width and height on the paper sheet
  • RC class, fire rating, lock class — filled in from memory at the office, sometimes wrong
  • RC3 doors for a flat → the customer was meant to pay for RC2, the margin is lost
  • Test certificates — searched for in a binder, sometimes missing
  • A complaint after a year: “the handle is coming loose” — you don't even know if it was your installation
  • The manufacturer gets the wrong wall thickness → the doors go back to production, 4 weeks' delay
With our CRM

How it works with us

  • One quote with your showroom's logo, even with items from several manufacturers — imported from PDF with your markup or a discount off the list price
  • Wall opening, wall thickness and frame type — the wizard takes you through every field
  • RC, EI and lock classes — picked from a list, not typed from memory
  • Classes from the measurement are on the record when pricing — the adviser doesn't guess what's being quoted
  • RC3 with a lock weaker than C? The warning appears while you're still at the customer's
  • Complaint: contract number → you have the installer, date, class, photos, warranty
  • The manufacturer gets the full measurement data — the doors fit, installation in 4 weeks

Questions about software for door showrooms

What door details does the surveyor record?

For interior doors: the wall opening dimensions, hinge side, opening direction, frame type, architraves, threshold and lock. For entrance doors also leaf thickness and wall depth, transom and side lights, RC burglar resistance class, lock class, Ud value and EI fire resistance.

Which mistakes does the door measurement wizard warn about?

Among others: a wall thickness outside the range of an adjustable frame (80–250 mm), RC3 or higher doors with a lock weaker than class C, a leaf thinner than 68 mm for a burglar-resistant door, and a Ud value that fails the WT 2021 thermal standard.

Can the installation crew see the job on a phone?

Yes. The crew gets a link to its installations — with the address and navigation, the items from the contract and the acceptance protocol the customer signs on the screen. They don't need an account in the software for that.

How much does software for a door showroom cost?

The Start plan for one person costs $49 net per month, Pro for a team of up to 10 people $99, and Business for a network of up to 10 branches $229. Plans differ in their limits, and Business also lets you run several companies from one account. You can try any of them free for 14 days, without entering a card.

Does door measurement work without signal?

Yes. Field mode runs on the phone like an app: dimensions, items and measurement status are saved on the phone and sent automatically when the connection comes back. Photos and the customer's signature need a connection.

Does a door quote turn into a contract?

Yes. From a quote the customer has accepted, you create a contract with the same items and amounts, and the quote moves to “Accepted” by itself. The contract is printed from your own template, with your terms for warranty, withdrawal and complaints.

Can I bring the manufacturer's door pricing into a quote?

Yes. In the quote editor the “Import from PDF” button loads the manufacturer's pricing: the software reads the items, dimensions, parameters and prices, adds your markup or takes a discount off the list price, and checks the total against the document. Items from the survey get the price and parameters, and the drawing from the PDF goes into the item and onto the printed quote. You see and can correct everything before it is added.

The manufacturer won't take a return for someone else's measuring error. That's why the wizard asks for every field separately.

An RC3 door isn't a plank of wood — it's a certified product. The manufacturer won't take it back if the opening was measured wrong. The wizard takes the surveyor through the full set of fields: opening width, height, wall thickness, frame type, RC class, lock class. When a dimension falls outside the typical range, it shows a warning while still at the customer's, not a week later at the office. The manufacturer gets a complete set of data from one source instead of a reading from a handwritten sheet.

14 days free, no card. We import your customer database from Excel during onboarding.